Solution
1. Holding the Camera2. When the Camera Shake Icon Appears
3. Image is blurred
4. The AF frame does not appear, and the camera does not focus
5. Shooting Range
When an image is blurry or cannot be brought into focus during shooting, please check the following.
Caution
1. Holding the Camera
You can prevent camera shake by holding the camera firmly.
2. When the Camera Shake Icon Appears
When you press the ⋖Shutter Button⋗ halfway in low light conditions where camera shake is likely, a flashing () will appear.
Press the [ ] button, choose [IS Settings] on the [
] tab, choose [IS Mode], and then choose [Continuous].
Press the [Flash] [ ] button, and then press the [
], [
] buttons to choose [On] (
).
Press the ⋖FUNC./SET⋗ button, choose [ ] from the menu, and then choose the desired ISO speed.
Caution
The [ISO speed] can only be set in [ ] mode.
Additionally, you should set the [IS Mode] to [Off] when shooting with a tripod.
3. Image is blurred
Half-press the ⋖Shutter Button⋗ (press lightly to focus), and then press it fully (without releasing the ⋖Shutter Button⋗, press it all the way down).
For details on the shooting distances for the [Focusing Range] of your camera, please see the table at the end of the page.
Press the [ ] button, select the [Shooting] tab (
), and then set the [AF-assist Beam] to [On].
Press the ⋖Macro⋗ button () several times to select a suitable [Focusing Range].
4. The AF frame does not appear, and the camera does not focus
If you center on the light and dark contrasting area of the subject and push the ⋖Shutter Button⋗ halfway, or repeatedly push the ⋖Shutter Button⋗ halfway, the [AF frame] will appear and the camera will focus.
Caution
The camera may not be able to focus in some conditions.
5. Shooting Range
Focusing Range | Maximum Wide Angle ( | Maximum Telephoto ( |
5 cm - ∞ (2.0 in. - infinity) | 1.0 m - ∞ (3.3 ft. - infinity) | |
1 - 50 cm (0.4 in. - 1.6 ft.) | - | |
3.0 m - ∞ (9.8 ft. - infinity) | 3.0 m - ∞ (9.8 ft. - infinity) |