Canon Group
Close Close
Menu Menu Close Close Search
LEGRIA HF G30 Support
Drivers & downloads

XA25/XA20/HF G30, Firmware Version 1.0.5.0 [Mac OS X]

Content Id: 0400240502


Description



Detail

Firmware Version 1.0.5.0 incorporates the following fixes:
1. Fixes a phenomenon in which the "White balance mode and setting button", "Aperture button", and "Gain button" do not respond on the Wi-Fi Remote operation screen on an iOS device running iOS 9.


The version 1.0.5.0 firmware is for updating camcorders with firmware version 1.0.1.0 – 1.0.4.0. If your camcorder's firmware is already version 1.0.5.0, it is not necessary to update the firmware. Once the camcorder is updated to the latest version, it cannot be restored to a previous version.


Preparations for the Firmware Update:
After the Firmware update has been performed, the camcorder's menu and custom picture settings will be reset. It is recommended that users save their menu and custom picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camcorder and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Menu Settings".

The downloaded folder contains the firmware (file name: VJE5.FIM / file size: 29,494,144 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.


The following things are required to perform this firmware update:
1. A camcorder body
2. A computer (OS: Mac OS X)
OS Requirements: Mac OS X (10.7-10.11)
3. A 64 MB or higher-capacity SD/SDHC/SDXC memory card (both commercially available)
4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camcorder
6. Compact power adapter bundled with the camcorder
7. The firmware (the downloaded file)


History
Changes in Firmware Version 1.0.4.0:
1. Fixes a phenomenon in which flicker compensation may be incorrectly applied when shooting, resulting in flicker and horizontal color stripes in the footage.
2. Fixes a phenomenon in which the camera menu will freeze after choosing [Access Point Connection] from the [Wi-Fi] menu when Russian is selected in the language menu and the camera is running Firmware Version 1.0.3.0.
3. Fixes a phenomenon in which the audio will be out of sync when recording at 23.98P frame rate and 24 Mbps LPCM Recording Mode is selected.
4. Fixes a pre-recording control issue when recording in MP4 format.

Changes in Firmware Version 1.0.3.0:
1. Enhances compatibility with third-party remote controllers that are connected to the REMOTE terminal.
2. Resolves the phenomenon in which the headphones terminal audio output timing is delayed when [Normal] is selected as the [Monitor Delay] option.
3. When recording in the MP4 format [59.94P/50P (35Mbps)], changes have been made in the metadata details so that the time codes can be properly displayed in Apple Final Cut Pro X Version 10.0.9.

-Final Cut Pro X Version 10.0.9 displays frame number as: 00-59
-Camcorder displays frame number as: 00-29 (to comply with SMPTE Standard)

-Final Cut Pro X Version 10.0.9 displays frame number as: 00-49
-Camcorder displays frame number as: 00-24 ( to comply with EBU standard)
4. Corrects some wording in the onscreen guidance for connecting to Remote Browse in languages other than Japanese.

Changes in Firmware Version 1.0.2.0:
Due to management purpose

Changes in Firmware Version 1.0.1.0:
Start of production

File information


File Name : xa25-v1050-mac.dmg
File Type : FA
File Size : 27063930KB