The Camera Cannot Be Connected with a Computer / The Computer Does Not Recognize the Camera (EOS Ra)

Content Id: 8204724100

Solution

1. Camera's Wi-Fi is set to [Enable]
2. The camera is not connected properly to the computer with the USB cable
3. The camera is not recognized by EOS Utility (You can only click [Monitor Folder] on the main window of EOS Utility)
4. CameraWindow is being used

If the camera cannot be connected to a computer, it may be due to the following reasons. Please check the following items in order to find the cause of the problem.

1. Camera's Wi-Fi is set to [Enable]

If [Wi-Fi settings]'s [Wi-Fi] is set to [Enable] under [ 　: Wireless communication settings], connecting the camera to a computer will not be possible. After setting [Wi-Fi] to [Disable], connect the interface cable.

2. The camera is not connected properly to the computer with the USB cable

To connect the camera to a computer, use the supplied USB cable. For details on how to connect the camera to a computer, please refer to your camera’s Instruction Manual.

3. The camera is not recognized by EOS Utility (You can only click [Monitor Folder] on the main window of EOS Utility)

If the camera is not recognized by the supplied software, please check whether any of the following cases may be a remedy to the problem.

The supported software version may differ depending on the camera you use and the operating system installed on the computer.(Version 3.11 or later is supported.)

When using a camera or computer that differs from the model used initially, please download the supported version of EOS Utility. Versions of the EOS Utility Updater for a variety of cameras/operating systems can be downloaded from the Canon homepage.

EOS Utility and the camera may not communicate normally with a cable other than the EOS DIGITAL camera-dedicated Canon interface cable. Connect your camera and computer directly with the interface cable provided with your camera. Do not connect the camera via a hub; doing so may prevent EOS Utility and your camera from communicating normally.

If there is insufficient charge left in the camera battery, the camera cannot communicate with EOS Utility. In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E6 (Separately available).Your computer does not supply power to the camera through the interface cable.

4. CameraWindow is being used

Your camera does not support CameraWindow. If you are using CameraWindow, please install and use the EOS Utility application supplied with the camera.

Caution

If your computer does not meet the System Requirements for EOS Utility, you can import images using a card slot on the computer or a commercially available card reader.

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit